Floor Soap Nature

Description

Keep out of reach of children. 

CLEAN VEGETABLE OILS

Floor Soap Nature is produced from bright and clean vegetable oils that efficiently saturates the pores of the wood and thereby protects against spilled fluids. 

CONTENT

Soap 5-15%
Conservation <5%

DOSAGE

Should not be used in concentrated form on painted or fernized wood work as the soap kan dissolve the paint/lacquer. 
Finishing treatment: 0,3 liters of Floor Soap Nature for 5 liters of warm water. 
Regular cleaning: 0,1 liters of Floor Soap Nature for 5 liters of warm water. The dosage can be changed in regard to the degree of soiling. 

AFTER CARE

Finishing treatment: The floor must be free of dust and soil, and all new laid floors must be polished. The soap solution is applied with a mop or similar in the direction of wood until it is saturated. After a couple of minutes, wipe of the excessive soap with a moist cloth (without soap). The treatment is repeated 2-3 times when the surface is completely dry. Do not use too much water – the wood can expand, and when it dries, the wood will retract. On lamel parquet floors, the gluing can be damaged of too much water. 

Regular cleaning: Treated floors are easy to keep clean – vacuum is enough in the daily routine. 

Difficult stains: Soften the stain in water, rub concentrated soap into the stain and leave it to work for about 5 minutes. Remove the stain with a sponge and dry with a cloth.